CAMBRIDGE QT Spezifikationen PDF herunterladen (Seite 11)

www.csmqt.com/qtprosupport

If you are using a browser, subsequent

adjustments are automatic and you may

disregard the information below.

• If you are managing Qt PRO™ from the front control

panel, set the unit’s masking volumes to be 6-10 lev-

els lower on Day 1. Using the control panel, make

a +2 level adjustment before each workday begins,

until you reach the permanent masking volumes.

POST-INSTALLATION HANDOFF

• Perform a ﬁnal walkthrough. Once you are satisﬁed

with the system’s performance complete the

Installer section of the Settings Record (see back of

Guide) and record your contact information on the

inside door label. Leave the completed Guide with

the unit.

• Lock the control panel by switching the panel lock

toggle switch to “Locked”. Close and lock the box.

Hand the key to the administrator.

• If the unit is connected to the network, sit with

the network administrator and connect to the unit

using the Hostname or IP Address, Username and

Password. Click “HELP” to learn about operating

the unit in Networked Mode.

• If an acoustics professional is present, they

may wish to modify the tuning parameters (from

a browser).

• It is the responsibility of the administrator to ensure

that all settings are recorded. These values will be

used to reconﬁgure the system in the event of a

hard unit failure. Settings are automatically restored

upon recovery from a power failure.

PRINT SETTINGS: A complete settings record

can be printed from the “Print Settings” link on the

Administration page of the Qt PRO™ System

Monitoring and Control application.

It is advisable to print out a ﬁnal record of settings and

keep a copy with the unit.

1 2 ... 6 7 8 9 10 11 12 13 14 15 16

Keine Kommentare

CAMBRIDGE QT Spezifikationen Seite 11